Solder Secret

Solder Secret. How to solder ???

Elkhart Prod. Corp. 80009 Tee

Posted on | March 13, 2010 | No Comments

Elkhart Prod. Corp. 80009 Tee

Copper to copper to copper (sweat solder). Bulk pack. 10 per poly bag. No. 80009: 1 2″ No. 80010: 3 4″

(more…)

Category: copper solder
Tags: > > > > > > > > >

Elkhart Prod. Corp. 30170 Female Adapter

Posted on | March 12, 2010 | No Comments

Elkhart Prod. Corp. 30170 Female Adapter

Copper (sweat solder) to Female pipe thread. No. 30110: 1 4″ nominal copper to 1 4″ F.I.P.S. No. 30120: 3 8″ nominal copper to 3 8″ F.I.P.S. No. 30130: 1 2″ nominal copper to 1 2″ F.I.P.S. No. 30150: 3 4″ nominal copper to 3 4″ F.I.P.S. No. 30160: 1″ nomi

(more…)

Category: copper solder
Tags: > > > > > > > > > > > > > >

Elkhart Prod. Corp. 31424 90 Street Elbow

Posted on | March 11, 2010 | No Comments

Elkhart Prod. Corp. 31424 90 Street Elbow

Fitting to copper. Sweat solder fitting. No. 31396: 107 C2, 3 8″ nominal copper fitting to 3 8″ nominal copper tube No. 31400: 107 C2, 1 2″ nominal copper fitting to 1 2″ nominal copper tube No. 31408: 107 C2, 3 4″ nominal copper fitting to 3 4″ nominal c

(more…)

Category: copper solder
Tags: > > > > > > >

Pipemaster Soldering Tool

Posted on | March 10, 2010 | No Comments

Pipemaster Soldering Tool

The Antex Pipemaster Soldering Tool is designed to complement the torch in the tool kit of the plumbing contractor or home improvement enthusiast. With selectable heads, it can be used on all joints with fittings of 1/2, 3/8, or 3/4 inch. It is invaluable when working in areas where a blowlamp is a possible hazard or where access is limited (i.e. in roof spaces, under baths or basins, close to decoration or furnishings, near vehicles, etc.).

Make no mistake; this is not a crimp tool limited to special fittings. The Pipemaster solders copper pipe in as little as 10 seconds with standard tin solders (not recommended for silver brazing).

To make the most of your Pipemaster, make sure the copper pipe ends, and the inside of the (more…)

Category: copper solder
Tags: > > > > > > > > > > > > >

1-1/4″ Jet Swet single temporary plumbing plug tool

Posted on | March 9, 2010 | No Comments

1-1/4

This #125 Jet Swet tool by Brenelle is the professional temporary plumbing plug for 1-1/2″รข? plumbing pipes. This tool comes individually skin carded and it can be added to any Jet Swet kit. Jet Swets give the plumber the ability to be in complete control of the water system immediately upon arriving at the job. Normally, to repair a faulty valve or pinhole leak for example, the plumber would have to shut off the main water supply and wait for the entire system to completely drain until he could do the repair, for he could not solder with water dripping out of the line. The Jet Swet is an in-line tool that is inserted into the line beyond the repair site and tightened. The expanding gasket seals up to 65 lbs. of pressure i (more…)

Category: copper solder
Tags: > > > > > >
keep looking »